External Strengthening / 体外预应力加固

External Prestressing Strengthening Support(体外预应力加固技术支持)

Strengthening concept, external tendon layout, anchorage/deviator review and construction method support. 加固概念方案、体外钢束路径、锚固区/转向块复核和施工方法支持。

服务介绍

This service is for existing buildings, bridges, parking structures and industrial structures where load capacity, deflection or serviceability needs improvement. 适用于既有建筑、桥梁、停车楼和工业结构承载力、挠度或使用性能需要提升的项目。

Existing Structure Contexts / 既有结构场景

Infrastructure / 基础设施

Bridge and transport structures requiring capacity, durability or serviceability improvement. 需要提升承载、耐久或使用性能的桥梁和交通结构。

  • Bridge rehabilitation / 桥梁维修加固
  • External tendon route / 体外钢束路径
  • Anchorage and deviator zones / 锚固区与转向块
Buildings & Industrial Assets / 建筑与工业设施

Existing buildings, parking structures and industrial facilities with load change or limited demolition conditions. 荷载改变或不便大拆改的既有建筑、停车楼和工业设施。

  • Beam strengthening / 梁加固
  • Deflection and crack control / 挠度与裂缝控制
  • Change of use / 使用功能改变

Strengthening System Review / 加固体系复核

External prestressing is not just adding tendons. The anchorage, deviator, force path, site access and long-term protection must work as one system. 体外预应力不是简单加钢束,锚固、转向、传力路径、施工空间和长期防护必须成体系。

01 Concept Strategy / 概念策略

Define whether external prestressing is suitable before detailed drawings. 先判断是否适合体外预应力,再进入详图。

02 Tendon Route / 钢束路径

Review tendon geometry, deviation points, clearance and conflict with existing structure. 复核钢束线形、转向点、净空和既有结构冲突。

03 Anchorage & Deviator / 锚固与转向

Review local force transfer, reinforcement need and construction feasibility. 复核局部传力、补强需求和施工可行性。

04 Implementation Risk / 实施风险

Review jacking access, temporary works, corrosion protection and monitoring needs. 复核张拉空间、临时措施、防腐和监测需求。

服务内容

Technical Scope / 技术范围
  • Strengthening concept / 加固概念方案
  • External tendon path / 体外钢束路径
  • Anchorage zone review / 锚固区复核
  • Deviator arrangement / 转向块布置
Construction Review / 施工复核
  • Access and site constraints / 施工空间限制
  • Jacking sequence / 张拉顺序
  • Connection details / 连接构造
  • Risk and monitoring / 风险与监测

服务流程

01 Existing Structure Review / 既有结构复核

Collect drawings, inspection reports and site photos. 收集原图、检测报告和现场照片。

02 Strengthening Concept / 加固概念

Define external tendon strategy and key constraints. 明确体外钢束策略和关键限制。

03 Detail Review / 细部复核

Review anchorage, deviator and jacking feasibility. 复核锚固、转向块和张拉可行性。

04 Implementation Support / 实施支持

Support local consultant or contractor during execution. 支持当地顾问或承包商实施。

适用项目

Existing beam strengthening / 既有梁加固

Capacity improvement with limited demolition. 少拆改条件下提升承载力。

Bridge strengthening / 桥梁加固

External tendon systems for bridge rehabilitation. 桥梁修复中的体外钢束体系。

Change of building use / 建筑功能改变

Strengthening when service load increases. 使用荷载增加后的结构加固。

First Review Evidence / 初步复核资料

The first step is to decide whether external prestressing is structurally meaningful and buildable. 第一步是判断体外预应力是否有结构意义并且现场可实施。

  • Existing structural drawings / 原结构图
  • Inspection or defect information / 检测报告或缺陷资料
  • Load increase or service requirement / 荷载提升或使用要求
  • Site access, anchorage space and photos / 施工通道、锚固空间和现场照片

Do you have an existing structure to strengthen?

Submit drawings, defect photos and load requirements first. We will check whether external prestressing should be considered. 先提交图纸、缺陷照片和荷载要求,我们会判断是否适合体外预应力路线。

联系我们 / 提交需求

Submit existing drawings, inspection information, required load increase and site constraints. 请提交原结构图、检测信息、荷载提升要求和现场限制。

技术支持说明

服务结论由工程团队复核后确认。请确保图纸、现场信息、当地规范和实施条件齐备后提交。